Transcend's SATA III 6Gb/s SSD230S uses the latest 3D NAND technology that features vertical, stacked expansion of storage cells. By using high-quality flash memory and enhanced firmware algorithms, the SSD230S delivers greater performance and reliability.
3D expansion to break through limits
Unlike planar NAND memory, 3D NAND flash features memory cells stacked vertically in multiple layers. 3D NAND overcomes density limitations of 2D planar NAND, and delivers a higher level of performance and endurance.
Performance Boost for Everyday Computing
Taking full advantage of the SATA III 6Gb/s interface and built-in SLC caching technology, Transcend's SSD230S achieves exceptional transfer speeds of up to 560MB/s read and 520MB/s write.
Guaranteed Endurance and Reliability
Transcend's SSD230S offers great Terabytes Written (TBW) values (up to 2,240 TB) indicating the total amount of data you can write into the drive over its lifetime.
A better choice than HDD
Solid-state drives dominate the market for PC upgrades because they are faster and lighter than traditional hard disk drives. SSDs also consume less power, create less noise when in operation, and are more shock-resistant than hard drives.
RAID engine and LDPC coding
Detects and corrects transfer errors to prevent data corruption
Garbage Collection
Relocates existing data to release memory blocks
Wear-leveling
Distributes data evenly across memory cells to prolong SSD's lifespan
DevSleep
Intelligently shuts down SATA interface when not in use to prolong device's battery life
SSD Scope software
Transcend SSD Scope is advanced, user-friendly software that makes it easy to ensure your Transcend SSD remains healthy, and continues to run fast and error-free by determining the condition and optimizing the performance of your drive.
SPECS
Appearance
-
Dimensions: 100 mm x 69.85 mm x 6.8 mm
-
Weight: 53 g
Storage
-
Flash Type: 3D NAND flash
-
Capacity: 512 GB
Operating Environment
-
Operating Temperature: 0°C (32°F) ~ 70°C (158°F)
-
Operating Voltage: 5V±5%
Performance
-
Sequential Read/Write (CrystalDiskMark) - by capacity 2.5" SSD: Up to 560/500 MB/s
-
4K Random Read/Write (IOmeter) - by capacity 2.5" SSD: Up to 65,000/85,000 IOPS
-
Terabytes Written (TBW) - by capacity 2.5" SSD: 280 TBW
-
Mean Time Between Failures (MTBF): 2,000,000 hour(s)
-
Drive Writes Per Day (DWPD): 0.3 (3 yrs)
System Requirement
-
Operating System: Microsoft Windows 7 or later, Linux Kernel 2.6.31 or later
Technology
-
TRIM & NCQ Command: Yes
-
S.M.A.R.T.: Yes
-
DDR3 DRAM Cache: No
-
Advanced Garbage Collection: Yes
-
DevSleep Mode: Yes
-
RAID Engine: Yes
-
LDPC Coding: Yes