Skip to product information
1 of 5

APC Smart-UPS On-Line, 5kVA 5000va, Rack/Tower, 230V, 2x IEC C13+1x IEC C19+Hard wire 3-wire (H+N+E) outlets SRTG5KXLI

APC Smart-UPS On-Line, 5kVA 5000va, Rack/Tower, 230V, 2x IEC C13+1x IEC C19+Hard wire 3-wire (H+N+E) outlets SRTG5KXLI

Regular price 9,662,000.00 TZS
Regular price Sale price 9,662,000.00 TZS
Sale Sold out
18% Vat Inclusive. Shipping calculated at checkout.

Low stock: 1 left

High density, double-conversion on-line power protection with scalable runtime.

Key Features

  • Output power capacity: 6.0kWatts / 6.0kVA
  • Output Connections: (1) IEC 60320 C19 (Battery Backup), (2) IEC 60320 C13 (Battery Backup), (1) Hard wire 3-wire (H N + E) (Battery Backup)
  • Nominal Output Voltage: 230V
  • Nominal Input Voltage: 230V
  • Input Connections: Hard wire 3-wire (1P + N + E)
  • Pack includes: Smart UPS signaling RS-232 cable, User manual


  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • ECO Mode: Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
  • LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
  • Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Save time with easy and convenient remote/network accessibility: Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
  • Avoids costly power problems by keeping your IT equipment and data protected and available: Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
  • Serial connectivity: Provides management of the UPS via a serial port.
  • Network manageable: Most models provide remote power management options of the UPS over the network. 
  • LED status indicators: Quickly understand unit and power status with visual indicators.
  • Intelligent Card Slot: Customize UPS capabilities with management cards.
  • InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager.
  • Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Scalable runtime: Allows additional run time to be quickly added as needed.
  • Rack/Tower convertible: Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  • Plug-and-Play external batteries: Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  • Flash upgradeable firmware: Install maintenance releases of firmware remotely using FTP.



  • Main Input Voltage: 230 V
  • Main Output Voltage: 230 V
  • Rated power in W: 5000 W
  • Rated power in VA: 5000 VA
  • Nb of power socket outlets: 2 IEC 60320 C13, 1 IEC 60320 C19
  • Output connector type: Hard wire 3-wire (H N + E) 1
  • Battery type: Lead-acid battery
  • Provided equipment: Smart UPS signaling RS-232 cable, User manual, USB cable


  • Height: 17.78 cm
  • Width: 44 cm
  • Depth: 62 cm
  • Net weight: 51.9 kg
  • Mounting mode: Rack-mounted with kit ( NOT INCLUDED)
  • USB compatible: No


  • Network frequency: 40...70 Hz auto-sensing
  • Number of input connectors: 1 hard wire 3-wire (1P + N + E)
  • Input voltage limits: 160...285 V
  • Maximum input current: 30 A
  • Switching current capacity: 40 A


  • Maximum configurable power in W: 5000 W
  • Harmonic distortion: Less than 2 %
  • Output frequency: 50/60 Hz +/- 3 Hz sync to mains
  • Crest factor: 3 : 1
  • UPS type: Double conversion online
  • Wave type: Sine wave
  • Bypass type: Internal bypass (automatic and manual)
  • Full load runtime: 00:03:30 5000 W
  • Half load runtime: 00:10:20 2500 W
  • Maximum configurable power in VA: 5000 VA


  • Ambient air temperature for operation: 0…40 °C
  • Relative humidity: 0…95 % non-condensing
  • Operating altitude: 0...6600 ft
  • Acoustic level: 55 dBA
  • Heat dissipation: 1108.95 Btu/h
  • IP degree of protection: IP20

Batteries & Runtime

  • Run Time: View Runtime Graph
  • Number of battery filled slots: 2
  • Number of battery free slots: 0
  • Battery recharge time: 4 h
  • Additional information: Configurable for 220 : 230 or 240 nominal output voltage
  • Battery voltage: +/- 96 V
  • Battery charger power: 239 W rated
  • Battery power in VAH: 960 VAh capacity, 960 VAh runtime
  • Battery option: SRTG192XLBP4 1 2651 VAh, SRTG192XLBP4 2 4424 VAh, SRTG192XLBP4 3 6314 VAh, SRTG192XLBP4 4 8118 VAh
  • Extended runtime: 1

Communications & Management

  • Preinstalled device: Network management card
  • Control panel: LED Status display with on line on battery, Multifunction LCD status and control console
  • Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
  • Emergency power off: Yes
View full details

Quick information

Warranty information

Click here to view warranty information for various brands

Shipping & Delivery

  • Dispatch time: IN-STOCK products are usually dispatched in 2-6 hours after receiving order
  • Delivery period in Dar es Salaam: Usually Dar es Salaam orders are delivered same working day, unless there is a delay in compiling the order which might move the delivery to next working day
  • Delivery period for Up-country Tanzania and rest of Africa: Up-country orders within Tanzania take 2-3 days to be delivered, while orders from other countries in Africa may take 2-5 days to be delivered depending on your location. Please click here to check exact delivery times


  • Cash on Delivery C.O.D: Only available for orders below Tshs. 500,000/- in Dar es Salaam.
  • Pre-payment methods: Debit/credit card, Selcom, M-pesa, Tigo Pesa, Airtel Money, Bank T.T. For more details on our payment methods please click here

Customer Reviews

Based on 1 review
Abdul Yakar