Skip to product information
1 of 5

APC Smart-UPS C 1500VA, LCD, 8 IEC Sockets, 230V with SmartConnect SMC1500I

APC Smart-UPS C 1500VA, LCD, 8 IEC Sockets, 230V with SmartConnect SMC1500I

Regular price 2,147,900.00 TZS
Regular price Sale price 2,147,900.00 TZS
Sale Sold out
Tax included. Shipping calculated at checkout.

Out of stock

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs, etc.

  • Output power capacity: 900Watts / 1.5kVA
  • Output Connections: (8) IEC 320 C13 (Battery Backup), (2) IEC Jumpers (Battery Backup)
  • Nominal Output Voltage: 230V
  • Nominal Input Voltage: 230V
  • Input Connections: IEC-320 C14

FEATURES

  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • High online efficiency: Reduces utility costs, generates less heat.
  • LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  • Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Audible alarms: Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
  • LED status indicators: Quickly understand unit and power status with visual indicators.
  • Serial connectivity: Provides management of the UPS via a serial port.
  • USB connectivity: Provides management of the UPS via a USB port (not available on all models).
  • Network manageable: Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
  • Resettable circuit breakers: Enables a quick recovery from overload events.
  • Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Specifications

Output

  • Max Configurable Power (Watts): 900Watts / 1.5kVA
  • Output Voltage Distortion: Less than 5%
  • Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
  • Other Output Voltages: 220, 240
  • Topology: Line Interactive
  • Waveform type: Sine wave
  • Transfer Time: 6ms typical : 10ms maximum

Input

  • Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
  • Input voltage range for main operations: 180 - 287V
  • Input voltage adjustable range for mains operation: 170 - 300V
  • Other Input Voltages: 220, 240

Batteries & runtime

  • Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
  • Typical recharge time: 3 hour(s)
  • Replacement Battery: RBC6
  • RBC Quantity: 1
  • Battery Charge Power (Watts): 96Watts
  • Battery Volt-Amp-Hour Capacity: 288
  • Runtime: View Runtime Chart

Communications & Management

  • Interface Port(s): USB
  • Control panel: Multi-function LCD status and control console
  • Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays

Surge Protection and Filtering

  • Surge energy rating: 459 Joules
  • Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

  • Height: 219MM, 21.9CM
  • Width: 171MM, 17.1CM
  • Depth: 439MM, 43.9CM
  • Net Weight: 20.1KG

Environmental

  • Operating Temperature: 0 - 40 °C
  • Operating Relative Humidity: 0 - 95 %
  • Operating Elevation: 0-3000meters
  • Audible noise at 1 meter from surface of unit: 45.0dBA
View full details

Quick information

Warranty information

Click here to view warranty information for various brands

Shipping & Delivery

  • Dispatch time: IN-STOCK products are usually dispatched in 2-6 hours after receiving order
  • Delivery period in Dar es Salaam: Usually Dar es Salaam orders are delivered same working day, unless there is a delay in compiling the order which might move the delivery to next working day
  • Delivery period for Up-country Tanzania and rest of Africa: Up-country orders within Tanzania take 2-3 days to be delivered, while orders from other countries in Africa may take 2-5 days to be delivered depending on your location. Please click here to check exact delivery times

Payments

  • Cash on Delivery C.O.D: Only available for orders below Tshs. 500,000/- in Dar es Salaam, Dodoma, Arusha, Mbeya, Bukoba, Musoma, Tabora and Zanzibar
  • Pre-payment methods: Debit/credit card, Selcom, M-pesa, Tigo Pesa, Airtel Money, Bank T.T. For more details on our payment methods please click here

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Alykhan Somani

.