TRANSCEND 1 TB SATA III 2.5" SSD 6Gb/s TS1TSSD220Q

Transcend's SATA III 6 Gb/s SSD220Q uses the latest QLC NAND technology, which employs a higher density of storage cells. By using high-quality flash memory and enhanced firmware algorithms, the SSD220Q delivers greater performance and reliability.

Less is More

Featuring QLC NAND Flash, SSD220Q's storage density per cell boosts 33%. More storage capacity is unleashed for more data. Your performance is no longer limited. Unlock your potential now!

Performance Boost for Everyday Computing

Taking full advantage of the SATA III 6 Gb/s interface and built-in SLC caching technology, Transcend's SSD220Q achieves exceptional transfer speeds of up to 550 MB/s read and 500 MB/s write.

Guaranteed Endurance and Reliability

Transcend's SSD220Q offers great terabytes written (TBW) values (up to 400 TBW) indicating the total amount of data you can write on the drive over its lifetime.

A better choice than HDD

Solid-state drives dominate the market for PC upgrades because they are faster and lighter than traditional hard disk drives. SSDs also consume less power, create less noise when in operation, and are more shock-resistant than hard drives.

RAID engine and LDPC coding

Detects and corrects transfer errors to prevent data corruption

Garbage Collection

Relocates existing data to release memory blocks

Wear-leveling

Distributes data evenly across memory cells to prolong SSD's lifespan

DevSleep

Intelligently shuts down SATA interface when not in use to prolong device's battery life

SSD Scope software

Transcend SSD Scope is advanced, user-friendly software that makes it easy to ensure your Transcend SSD remains healthy, and continues to run fast and error-free by determining the condition and optimizing the performance of your drive.

SPECS

• Dimensions: 100 mm x 69.85 mm x 6.8 mm
• Weight: 45 g 

• Flash Type: QLC NAND flash
• Capacity: 1 TB

• Operating Temperature: 0°C (32°F) ~ 70°C (158°F)
• Operating Voltage: 5V±5%

• Sequential Read/Write (CrystalDiskMark) - by capacity 2.5" SSD: Up to 550/500 MB/s
• 4K Random Read/Write (IOmeter) - by capacity 2.5" SSD: Up to 57,000/79,000 IOPS
• Terabytes Written (TBW) - by capacity 2.5" SSD: 200 TBW
• Mean Time Between Failures (MTBF): 2,000,000 hour(s)
• Drive Writes Per Day (DWPD): 0.19 (3 yrs)

• Operating System: Microsoft Windows 7 or later, Linux Kernel 2.6.31 or later

• TRIM & NCQ Command: Yes
• S.M.A.R.T.: Yes
• DDR3 DRAM Cache: No
• Advanced Garbage Collection: Yes
• DevSleep Mode: Yes
• RAID Engine: Yes
• LDPC Coding: Yes