APC Smart-UPS 2200VA LCD 230V with SmartConnect & SmartSlot SMT2200IC

Intelligent and efficient network power protection from entry level to scalable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices.

• Output power capacity: 1.98kWatts / 2.2kVA
• Output Connections: (2) IEC Jumpers (Battery Backup), (8) IEC 320 C13 (Battery Backup), (1) IEC 320 C19 (Battery Backup)
• Nominal Output Voltage: 230V
• Nominal Input Voltage: 230V
• Input Connections: BS1363A British, IEC 320 C20, Schuko CEE 7 / EU1-16P

Features

• Cold-start capable: Provides temporary battery power when the utility power is out.
• Energy meter: Provides actual kilowatt hours of usage for energy conscious users.
• Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
• High online efficiency: Reduces utility costs, generates less heat.
• Intuitive LCD interface: Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys.
• Predictive replace battery date: Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
• Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
• Sequenced network shutdown and reboot: Customize network shutdown and reboot sequence of connected servers and UPSs.
• Single switched outlet group: Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding.
• SmartConnect: Innovative, easy to use remote monitoring feature that provides automatic notifications, firmware updates, and advanced support services.
• SmartSlot: Customize UPS capabilities with management cards.
• StruxureWare Data Center Expert compatible: Enables centralized management via StruxureWare Data Center Expert.
• Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.

 Specifications

Output

• Max Configurable Power (Watts): 1.98kWatts / 2.2kVA
• Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
• Output Voltage Distortion: Less than 5 %
• Output Frequency (sync to mains): 50/60 Hz +/- 3 Hz Sync to mains
• Other Output Voltages: 220, 240
• Topology: Line interactive
• Waveform type: Sine wave
• Transfer Time: 6 ms typical : 10 ms maximum

Input

• Input frequency: 50/60 Hz +/- 3 Hz Auto-sensing
• Input voltage range for main operations: 151 - 302 Adjustable, 160 - 286V
• Number of Power Cords: 1
• Other Input Voltages: 220, 240

Batteries & Runtime

• Battery type: Lead-acid battery
• Typical recharge time: 3 hour(s)
• Replacement Battery: RBC55
• Expected Battery Life (years): 3 
• RBC Quantity: 1
• Battery Charge Power (Watts): 260 Watts
• Battery Volt-Amp-Hour Capacity: 783

Communications & Management

• Interface Port(s): RJ-45 Serial, SmartSlot, USB
• Control panel: Multifunction LCD status and control console
• Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays
• Emergency Power Off (EPO): Yes
• Available SmartSlot™ Interface Quantity: 1

Surge Protection and Filtering

• Surge energy rating: 365Joules
• Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

• Height: 43.5CM
• Width: 19.7CM
• Depth: 54.4CM
• Net Weight: 50.2KG

Environmental

• Operating Temperature: 0 - 40 °C
• Operating Relative Humidity: 0 - 95 %
• Operating Elevation: 0 - 3048meters
• Storage Temperature: -15 - 45 °C
• Storage Elevation: 0 - 15240meters