APC Smart-UPS SRT 2200VA, 230V, 8 x C13+2x C19 IEC outlets, Extended Runtime. SRT2200XLI
APC Smart-UPS SRT 2200VA, 230V, 8 x C13+2x C19 IEC outlets, Extended Runtime. SRT2200XLI
Regular price
5,863,800.00 TZS
Regular price
Sale price
5,863,800.00 TZS
Unit price
per
18% Vat Inclusive.
Shipping calculated at checkout.
Low stock: 2 left
Couldn't load pickup availability
High density, double-conversion on-line power protection with scalable runtime
- Output Connections: (2) IEC Jumpers (Battery Backup), (8) IEC 320 C13 (Battery Backup), (2) IEC 60320 C19 (Battery Backup), (2) IEC 320 C19 (Battery Backup), (8) IEC 60320 C13 (Battery Backup)
- Input Connections: BS1363A British, IEC 60320 C20, Schuko CEE 7 / EU1-16P
- Cord Length: 2.4meters
Smart-UPS On-Line Features & Benefits
- Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
- User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
- Disconnected battery notification: Warns when a battery is not available to provide backup power.
- Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
- Flash upgradeable firmware: Install maintenance releases of firmware remotely using FTP.
- Plug-and-Play external batteries: Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
- Rack/Tower convertible: Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
- Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
- Cold-start capable: Provides temporary battery power when the utility power is out.
- Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
- Input Power Factor Correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
- Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
- Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
- Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.
- InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager.
- LED status indicators: Quickly understand unit and power status with visual indicators.
- Network manageable: Provides remote power management of the UPS over the network.
- Serial connectivity: Provides management of the UPS via a serial port.
- SmartSlot: Customize UPS capabilities with management cards.
- Scalable runtime: Allows additional run time to be quickly added as needed.
- Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
- Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
- Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
- Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
- Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
Output
- Max Configurable Power (Watts): 1.98kWatts / 2.2kVA
- Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
- Output Voltage Distortion: Less than 2 %
- Output Frequency (sync to mains): 50/60 Hz +/- 3 Hz Sync to mains
- Other Output Voltages: 220, 240
- Load Crest Factor: 3 : 1
- Topology: Double conversion online
- Waveform type: Sine wave
- Bypass: Internal bypass (automatic and manual)
Input
- Input frequency: 40 - 70 Hz Auto-sensing
- Input voltage range for main operations: 100 - 275 Adjustable (half load), 160 - 275V
- Number of Power Cords: 1
- Other Input Voltages: 220, 240
Batteries & Runtime
- Battery type: Lead-acid battery
- Included Battery Modules: 1
- Typical recharge time: 3hour(s)
- Nominal Battery Voltage: 72 V
- Replacement Battery: APCRBC 141
- Expected Battery Life (years): 3 - 5
- RBC Quantity: 1
- Battery Charge Power (Watts): 122 Watts
- Extendable Run Time: 1
- Battery Volt-Amp-Hour Capacity: 367
- Efficiency: View Efficiency Graph
Communications & Management
- Interface Port(s): RJ-45 Serial, Smart-Slot, USB
- Control panel: Multifunction LCD status and control console
- Audible Alarm: Audible and visible alarms prioritized by severity
- Emergency Power Off (EPO): Yes
- Available SmartSlot™ Interface Quantity: 1
Surge Protection
- Surge energy rating: 340Joules
Physical
- Maximum Height: 432MM, 43.2CM
- Maximum Width: 85MM, 8.5CM
- Maximum Depth: 584MM, 58.4CM
- Net Weight: 25.0KG
- Shipping weight: 30.84KG
- Color: Black
Environmental
- Operating Temperature: 0 - 40 °C
- Operating Relative Humidity: 0 - 95 (Non-condensing) %
- Operating Elevation: 0 - 3048meters
- Storage Temperature: -15 - 45 °C
- Storage Elevation: 0 - 15240meters
Share
Quick information
Warranty information
Click here to view warranty information for various brands
Shipping & Delivery
- Dispatch time: IN-STOCK products are usually dispatched in 2-6 hours after receiving order
- Delivery period in Dar es Salaam: Usually Dar es Salaam orders are delivered same working day, unless there is a delay in compiling the order which might move the delivery to next working day
- Delivery period for Up-country Tanzania and rest of Africa: Up-country orders within Tanzania take 2-3 days to be delivered, while orders from other countries in Africa may take 2-5 days to be delivered depending on your location. Please click here to check exact delivery times
Payments
- Payment methods: For more details on our payment methods please click here