Skip to product information
1 of 5

APC Smart-UPS C 1500VA, LCD, 8 IEC Sockets, 230V with SmartConnect SMC1500I

APC Smart-UPS C 1500VA, LCD, 8 IEC Sockets, 230V with SmartConnect SMC1500I

Regular price 1,893,500.00 TZS
Regular price Sale price 1,893,500.00 TZS
Sale Sold out
18% Vat Inclusive. Shipping calculated at checkout.

Out of stock

Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs, etc.

  • Output power capacity: 900Watts / 1.5kVA
  • Output Connections: (8) IEC 320 C13 (Battery Backup), (2) IEC Jumpers (Battery Backup)
  • Nominal Output Voltage: 230V
  • Nominal Input Voltage: 230V
  • Input Connections: IEC-320 C14

FEATURES

  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Green mode: Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
  • High online efficiency: Reduces utility costs, generates less heat.
  • LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  • Pure sine wave output on battery: Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Boost and Trim Automatic Voltage Regulation (AVR): Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models).
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Audible alarms: Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.
  • LED status indicators: Quickly understand unit and power status with visual indicators.
  • Serial connectivity: Provides management of the UPS via a serial port.
  • USB connectivity: Provides management of the UPS via a USB port (not available on all models).
  • Network manageable: Most models provide remote power management options of the UPS over the network. Many do not have NMC embedded.
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
  • Resettable circuit breakers: Enables a quick recovery from overload events.
  • Adjustable voltage sensitivity: Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications.
  • Adjustable voltage-transfer points: Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.

Specifications

Output

  • Max Configurable Power (Watts): 900Watts / 1.5kVA
  • Output Voltage Distortion: Less than 5%
  • Output Frequency (sync to mains): 50/60Hz +/- 3 Hz
  • Other Output Voltages: 220, 240
  • Topology: Line Interactive
  • Waveform type: Sine wave
  • Transfer Time: 6ms typical : 10ms maximum

Input

  • Input frequency: 50/60 Hz +/- 3 Hz (auto sensing)
  • Input voltage range for main operations: 180 - 287V
  • Input voltage adjustable range for mains operation: 170 - 300V
  • Other Input Voltages: 220, 240

Batteries & runtime

  • Battery type: Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof
  • Typical recharge time: 3 hour(s)
  • Replacement Battery: RBC6
  • RBC Quantity: 1
  • Battery Charge Power (Watts): 96Watts
  • Battery Volt-Amp-Hour Capacity: 288
  • Runtime: View Runtime Chart

Communications & Management

  • Interface Port(s): USB
  • Control panel: Multi-function LCD status and control console
  • Audible Alarm: Alarm when on battery : distinctive low battery alarm : configurable delays

Surge Protection and Filtering

  • Surge energy rating: 459 Joules
  • Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

  • Height: 219MM, 21.9CM
  • Width: 171MM, 17.1CM
  • Depth: 439MM, 43.9CM
  • Net Weight: 20.1KG

Environmental

  • Operating Temperature: 0 - 40 °C
  • Operating Relative Humidity: 0 - 95 %
  • Operating Elevation: 0-3000meters
  • Audible noise at 1 meter from surface of unit: 45.0dBA
View full details

Quick information

Warranty information

Click here to view warranty information for various brands

Shipping & Delivery

  • Dispatch time: IN-STOCK products are usually dispatched in 2-6 hours after receiving order
  • Delivery period in Dar es Salaam: Usually Dar es Salaam orders are delivered same working day, unless there is a delay in compiling the order which might move the delivery to next working day
  • Delivery period for Up-country Tanzania and rest of Africa: Up-country orders within Tanzania take 2-3 days to be delivered, while orders from other countries in Africa may take 2-5 days to be delivered depending on your location. Please click here to check exact delivery times

Payments

  • Payment methods: For more details on our payment methods please click here

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Alykhan Somani

.