Sku: srt2200xli
Type: UPS Power Backup

APC Smart-UPS SRT 2200VA, 230V, 8 x C13+2x C19 IEC outlets, Extended Runtime. SRT2200XLI

Name: APC Smart-UPS SRT 2200VA, 230V, 8 x C13+2x C19 IEC outlets, Extended Runtime. SRT2200XLI
Brand: APC
SKU: srt2200xli
Price: 4599000.0 TZS
Availability: OutOfStock

4,599,000.00 TZS

Tax included.

Shipping calculated at checkout.

Product variants

SHIPPING/ PICK-UP DETAILS FOR THIS PRODUCT

Estimated Shipping Widget will be displayed here!

PRODUCT DESCRIPTION

High density, double-conversion on-line power protection with scalable runtime

Output Connections: (2) IEC Jumpers (Battery Backup), (8) IEC 320 C13 (Battery Backup), (2) IEC 60320 C19 (Battery Backup), (2) IEC 320 C19 (Battery Backup), (8) IEC 60320 C13 (Battery Backup)
Input Connections: BS1363A British, IEC 60320 C20, Schuko CEE 7 / EU1-16P
Cord Length: 2.4meters

Smart-UPS On-Line Features & Benefits

Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
Disconnected battery notification: Warns when a battery is not available to provide backup power.
Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
Flash upgradeable firmware: Install maintenance releases of firmware remotely using FTP.
Plug-and-Play external batteries: Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
Rack/Tower convertible: Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
Cold-start capable: Provides temporary battery power when the utility power is out.
Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Input Power Factor Correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.
InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager.
LED status indicators: Quickly understand unit and power status with visual indicators.
Network manageable: Provides remote power management of the UPS over the network.
Serial connectivity: Provides management of the UPS via a serial port.
SmartSlot: Customize UPS capabilities with management cards.
Scalable runtime: Allows additional run time to be quickly added as needed.
Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.

Max Configurable Power (Watts): 1.98kWatts / 2.2kVA
Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
Output Voltage Distortion: Less than 2 %
Output Frequency (sync to mains): 50/60 Hz +/- 3 Hz Sync to mains
Other Output Voltages: 220, 240
Load Crest Factor: 3 : 1
Topology: Double conversion online
Waveform type: Sine wave
Bypass: Internal bypass (automatic and manual)

Input frequency: 40 - 70 Hz Auto-sensing
Input voltage range for main operations: 100 - 275 Adjustable (half load), 160 - 275V
Number of Power Cords: 1
Other Input Voltages: 220, 240