APC Easy UPS SMV 3000 VA, 230 V Universal Outlet SMV3000Ai-MSX

  • 1,987,300.00 TZS
    Unit price per 
Tax included. Shipping calculated at checkout.

Only 0 left!
Will be in stock after

The best UPS with backup battery and surge protection for electronics and computers

Output power capacity
2.1kWatts / 3.0kVA
Output connections
(6) IEC 320 C13 (Backup batteries)
Nominal output voltage
Nominal Input Voltage
Input connection type
IEC-320 C20
APC Easy UPS SMV 3000 VA, 230 V
The best UPS with backup battery and surge protection for electronics and computers
Includes: Documentation CD, USB cable, User manual

  • Automatic voltage regulation
    Raises low voltages and lowers high voltages automatically to levels appropriate to your equipment.
  • Cold start possible
    Provides temporary battery power in the event of a power failure.
  • LCD graphic display
    Schematic texts and diagrams that display the operating modes, system parameters and alarms.
  • Pure sine wave output on battery
    Simulates AC power to provide the highest degree of compatibility with sensitive electronic equipment and active servers with a power factor corrector (PFC).

Easy-UPS features and benefits

Simplicity of management

Audible alarms
Informs of the change of the conditions of the mains supply and of the inverter.
LED Indicators
Allows easy reading of the state of the mains supply, inverter and battery.


Automatic voltage regulation (AVR) by amplification
Preserves battery life and optimizes operating time by correcting low voltages without discharging the battery.
Stylish design
Their modern and slim design can be vertical, flat or wall-mounted, to easily adapt to all electronic configurations and interior decoration.
Sockets spaced from transformer blocks
Protects equipment with input transformer blocks without preventing access to other receptacles.
Cold start possible
Provides temporary battery power in the event of a power failure.


Approved by a security office
Ensures that the product has been tested and approved to work safely with connected loads and in the environment.


Intelligent battery management
Maximizes battery performance, life and reliability through an intelligent precision charging process.
Advanced security features
Protect your inverter for household use against overloads, excessive mains voltages, short circuits, installation incidents and damage to the batteries due to low voltages.
Battery failure notification
Offers a battery failure analysis function with early warning, allowing preventive maintenance to be carried out on time


Battery and sockets protected against overvoltage
Back up and protect your hardware and data in the event of power outages, surges or peaks.
Backup battery and surge arrester
The outlets allow network gateway equipment and other critical low-power devices to continue operating for several hours so that you always have access to the Internet during a power outage.


Configurable power max. (Watts)
2.1kWatts / 3.0kVA
Output frequency (not sync)
50/60 Hz +/- 1 Hz
Load crest factor
Line interactive
Waveform type
Transfer time
2ms typical


Input frequency
45/65 Hz (autodetection)
Input voltage range for mains connection
157 - 303V
Number of power cords
Other input voltages
220, 240

Batteries & operating time

Battery Type
Maintenance-free sealed lead-acid battery with suspended electrolyte: waterproof
Typical recharge time
4 hours)
Expected battery life (years)
3 - 5
Battery Capacity Volt Ampere Hour

Communication and management

Port (s) Interface
Audible alarm
Alarm when switching to battery mode; separate battery minimum level alarm; continuous alarm in case of overload


Max. Height
240mm, 24.0cm
Max width
180mm, 18.0cm
Max depth
455mm, 45.5cm
Net weight
Weight with packaging
Transport height
410mm, 41.05cm
Transport width
326mm, 32.6cm
Transport depth
601mm, 60.1cm


Operating temperature
0 - 40 ° C
Relative humidity in operation
0 - 95 (non-condensing)%
Operating altitude
Storage temperature
-10 - 40 ° C
Relative storage humidity
0 - 95%
Storage altitude
Audible noise 1 meter from the surface of the device