• APC Smart-UPS 6 kVA 6000VA SRTG6KXLI | APC power ups in Dar Tanzania
  • APC Smart-UPS 6 kVA 6000VA SRTG6KXLI | APC power ups in Dar Tanzania
  • APC Smart-UPS 6 kVA 6000VA SRTG6KXLI | APC power ups in Dar Tanzania
  • APC Smart-UPS 6 kVA 6000VA SRTG6KXLI | APC power ups in Dar Tanzania
  • APC Smart-UPS 6 kVA 6000VA SRTG6KXLI | APC power ups in Dar Tanzania
1 5

APC Smart-UPS RT 6 kVA 6000VA, 230V, LCD, 2x IEC 60320 C13 & 1x IEC 60320 C19 outlets SRTG6KXLI

APC Smart-UPS RT 6 kVA 6000VA, 230V, LCD, 2x IEC 60320 C13 & 1x IEC 60320 C19 outlets SRTG6KXLI

11,887,000.00 TZS
11,887,000.00 TZS
Sale Sold out
18% Vat Inclusive. Shipping calculated at checkout.

Out of stock

High density, double-conversion on-line power protection with scalable runtime

Key Features

  • Output power capacity: 6.0kWatts / 6.0kVA
  • Output Connections: (1) IEC 60320 C19 (Battery Backup), (2) IEC 60320 C13 (Battery Backup), (1) Hard wire 3-wire (H N + E) (Battery Backup)
  • Nominal Output Voltage: 230V
  • Nominal Input Voltage: 230V
  • Input Connections: Hard wire 3-wire (1P + N + E)

Features

  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Battery failure notification: Provides early-warning fault analysis on batteries enabling timely preventive maintenance
  • ECO Mode: Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
  • LCD Status Display: Provides key UPS status at a glance. Multiple status indicators with load and battery bar graphs.
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
  • Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Cold-start capable: Provides temporary battery power when the utility power is out.
  • Serial connectivity: Provides management of the UPS via a serial port.
  • Network manageable: Most models provide remote power management options of the UPS over the network.
  • LED status indicators: Quickly understand unit and power status with visual indicators.
  • Intelligent Card Slot: Customize UPS capabilities with management cards.
  • InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager.
  • Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Scalable runtime: Allows additional run time to be quickly added as needed.
  • Rack/Tower convertible: Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  • Plug-and-Play external batteries: Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  • Flash upgradeable firmware: Install maintenance releases of firmware remotely using FTP.

Specifications

Output

  • Max Configurable Power (Watts): 6.0kWatts / 6.0kVA
  • Output Voltage Note: Configurable for 220 : 230 or 240 nominal output voltage
  • Output Voltage Distortion: Less than 2 %
  • Output Frequency (sync to mains): 50/60 Hz +/- 3 Hz Sync to mains
  • Other Output Voltages: 220 V, 240 V
  • Load Crest Factor: 3 : 1
  • Topology: Double conversion online
  • Waveform type: Sine wave
  • Bypass: Internal bypass (automatic and manual)

Input

  • Input frequency: 40 - 70 Hz Auto-sensing
  • Input voltage range for main operations: 160 - 285V
  • Other Input Voltages: 220 V, 240 V

Batteries & Runtime

  • Battery type: Lead-acid battery
  • Included Battery Modules: 2
  • Typical recharge time: 4hour(s)
  • Nominal Battery Voltage: +/- 96 V
  • Battery Charge Power (Watts): 239 Watts
  • Extendable Run Time: 1
  • Battery Volt-Amp-Hour Capacity: 960
  • Runtime: View Runtime Graph

Communications & Management

  • Interface Port(s): RJ-45 Serial, Smart-Slot, USB
  • Control panel: LED Status display with on line : on battery, Multifunction LCD status and control console
  • Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
  • Emergency Power Off (EPO): Yes

Physical

  • Height: 178MM, 17.78CM
  • Width: 440MM, 44.0CM
  • Depth: 620MM, 62.0CM
  • Net Weight: 51.9KG
  • Shipping weight: 59.0KG

Environmental

  • Operating Temperature: 0 - 40 °C
  • Operating Relative Humidity: 0 - 95 (Non-condensing) %
  • Operating Elevation: 0 - 2011.68meters
  • Storage Temperature: -15 - 45 °C
  • Storage Relative Humidity: 0 - 95 (Non-condensing) %
  • Storage Elevation: 0 - 15240meters
  • Audible noise at 1 meter from surface of unit: 55.0dBA
  • Online thermal dissipation: 1331.0BTU/hr
  • Protection Class: IP20
View full details

Quick information

Warranty information

Click here to view warranty information for various brands

Shipping & Delivery

  • Dispatch time: IN-STOCK products are usually dispatched in 2-6 hours after receiving order
  • Delivery period in Dar es Salaam: Usually Dar es Salaam orders are delivered same working day, unless there is a delay in compiling the order which might move the delivery to next working day
  • Delivery period for Up-country Tanzania and rest of Africa: Up-country orders within Tanzania take 2-3 days to be delivered, while orders from other countries in Africa may take 2-5 days to be delivered depending on your location. Please click here to check exact delivery times

Payments

  • Cash on Delivery C.O.D: Only available for orders below Tshs. 500,000/- in Dar es Salaam, Dodoma, Arusha, Mbeya, Bukoba, Musoma, Tabora and Zanzibar
  • Pre-payment methods: Debit/credit card, Selcom, M-pesa, Tigo Pesa, Airtel Money, Bank T.T. For more details on our payment methods please click here

Customer Reviews

Based on 1 review
100%
(1)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
A
Amani Kamguna

.