Skip to product information
1 of 5

APC 20Kva 20000va Smart-UPS On-Line, Rack/Tower, Network Card, Without Rail Kit SRTG20KXLI

APC 20Kva 20000va Smart-UPS On-Line, Rack/Tower, Network Card, Without Rail Kit SRTG20KXLI

Regular price 34,197,000.00 TZS
Regular price Sale price 34,197,000.00 TZS
Sale Sold out
18% Vat Inclusive. Shipping calculated at checkout.

Out of stock

KEY FEATURES

  • APC Smart-UPS On-Line without rail kit
  • Output power capacity: 20.0kWatts / 20.0kVA
  • High density, double-conversion on-line power protection with scalable runtime
  • Includes: Smart UPS signalling RS-232 cable
  • Rack Height: 7U
  • Output Connections: (1) Hard wire 5-wire (3P + N + E), Hard wire 3-wire (1P + N + E) 1, IEC connector 3-wire (1P + N + E) 1
  • Nominal Output Voltage: 230V
  • Nominal Input Voltage: 230V
  • Input Connections: Hard wire 3-wire (1P + N + E), Hard wire 5 wire (3P + N + E)
  • Maximum Input Current: 87.0A

Features

  • Temperature-compensated battery charging: Prolongs battery life by regulating the charge voltage according to battery temperature.
  • Hot-swappable batteries: Ensures clean, uninterrupted power to protected equipment while batteries are being replaced
  • Automatic restart of loads after UPS shutdown: Automatically starts up the connected equipment upon the return of utility power.
  • Scalable runtime: Allows additional run time to be quickly added as needed.
  • Intelligent battery management: Maximizes battery performance, life, and reliability through intelligent, precision charging.
  • Automatic internal bypass: Supplies utility power to the connected loads in the event of a UPS power overload or fault.
  • InfraStruXure Manager Compatible: Enables centralized management via the APC InfraStruXure Manager.
  • LED status indicators: Quickly understand unit and power status with visual indicators.
  • Intelligent Card Slot: Customize UPS capabilities with management cards.
  • Serial connectivity: Provides management of the UPS via a serial port.
  • Network manageable: Most models provide remote power management options of the UPS over the network. 
  • Rack/Tower convertible: Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
  • Plug-and-Play external batteries: Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.
  • Flash upgradeable firmware: Install maintenance releases of firmware remotely using FTP.
  • Audible alarms: Provides notification of changing utility power and UPS power conditions
  • Disconnected battery notification: Warns when a battery is not available to provide backup power.
  • Automatic self-test: Periodic battery self-test ensures early detection of a battery that needs to be replaced.
  • User-replaceable batteries: Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR)
  • Predictive failure notification: Provides early-warning fault analysis ensuring proactive component replacement.
  • Avoids costly power problems by keeping your IT equipment and data protected and available: Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
  • Safety-agency approved: Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
  • Resettable circuit breaker: Easy recovery from overloads; no need to replace a fuse. (Not available on Wall Tap SKUs)
  • Generator compatible: Ensures clean, uninterrupted power to protected equipment when generator power is used.
  • Frequency and voltage regulation: Gives higher application availability by correcting poor frequency and voltage conditions without using the battery.
  • Power conditioning: Protects connected loads from surges, spikes, lightning, and other power disturbances.
  • Input power factor correction: Minimizes installation costs by enabling the use of smaller generators and cabling.
  • Cold-start capable: Provides temporary battery power when the utility power is out.

Specifications

Output

  • Max Configurable Power (Watts): 20.0kWatts / 20.0kVA
  • Output Voltage Note: Configurable for 380 : 400 or 415 V 3 Phase nominal output voltage. 230 V for 1 Phase
  • Output connector type: Hard wire 5 wire (3P + N + E) 1, Hard wire 3-wire (1P + N + E) 1, IEC connector 3-wire (1P + N + E) 1
  • Output Voltage Distortion: Less than 5 %
  • Output Frequency (sync to mains): 50/60 Hz +/- 0.1 Hz Sync to mains
  • Other Output Voltages: 230 V
  • Load Crest Factor: 3 : 1
  • Topology: Double conversion online
  • Waveform type: Sine wave
  • Overload Operation: 60 seconds at 125% and 30 seconds at 150%
  • Bypass: Built-in static bypass

Input

  • Input frequency: 40 - 70 Hz Auto-sensing
  • Input voltage range for main operations: 160 - 285, 380V
  • Maximum input current: 87 A
  • Switching current capacity: 125 A
  • Number of input connectors: 1 hard wire 5 wire (3P + N + E), 1 hard wire 3-wire (1P + N + E)
  • Input Total Harmonic Distortion: Less than 5 % for full load
  • Other Input Voltages: 220, -, 240 V
  • Load power factor: From 0.9 leading to 1 lagging

Batteries & Runtime

  • Battery type: Lead-acid battery
  • Typical recharge time: 4hour(s)
  • Nominal Battery Voltage: +/- 192 V
  • Expected Battery Life (years): 2-4
  • Battery Charge Power (Watts): 2.16kWatts
  • Extendable Run Time: 1
  • Battery Volt-Amp-Hour Capacity: 3366
  • Efficiency in Battery Operation: 93.0 %
  • Full load runtime: 00:03:30 20000 W
  • Half load runtime: 00:09:30 10000 W
  • Runtime: View runtime graph

Communications & Management

  • Control panel: Multifunction LCD status and control console
  • Audible Alarm: Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm
  • Emergency Power Off (EPO): Yes
  • Filtering: Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449

Physical

  • Height: 30.6 cm
  • Width: 44.0 cm
  • Depth: 70.0 cm
  • Net weight: 142.5 kg
  • Shipping weight: 157.2 kg
  • Mounting location: Front
  • Mounting preference: Lower
  • Mounting mode: Rack-mounted

Environmental

  • Operating Temperature: 0 - 40 °C
  • Operating Relative Humidity: 0 - 95 (Non-condensing) %
  • Operating Elevation: 0 - 3000meters
  • Storage Temperature: -15 - 45 °C
  • Audible noise at 1 meter from surface of unit: 58.0dBA
  • Online thermal dissipation: 2866.0BTU/hr
View full details

Quick information

Warranty information

Click here to view warranty information for various brands

Shipping & Delivery

  • Dispatch time: IN-STOCK products are usually dispatched in 2-6 hours after receiving order
  • Delivery period in Dar es Salaam: Usually Dar es Salaam orders are delivered same working day, unless there is a delay in compiling the order which might move the delivery to next working day
  • Delivery period for Up-country Tanzania and rest of Africa: Up-country orders within Tanzania take 2-3 days to be delivered, while orders from other countries in Africa may take 2-5 days to be delivered depending on your location. Please click here to check exact delivery times

Payments

  • Cash on Delivery C.O.D: Only available for orders below Tshs. 500,000/- in Dar es Salaam, Dodoma, Arusha, Mbeya, Bukoba, Musoma, Tabora and Zanzibar
  • Pre-payment methods: Debit/credit card, Selcom, M-pesa, Tigo Pesa, Airtel Money, Bank T.T. For more details on our payment methods please click here

Customer Reviews

Based on 2 reviews
100%
(2)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
F
Fadhil Investment

.

L
L.K. Associates

Genuine and brand new